成人免费看久久久a片,欧美另类videosbestsex牲,亚洲精品永久在线观看,国产suv精品一区二区62

sales@gninstruments.com

Type:CX-ICM-1104 industrial conductivity meter

Illustrate:It can be widely used for continuous monitoring of the conductivity values of the solutions used in the following industries: thermal power plants, chemical industry, chemical fertilizer, metallurgy, environmental protection, pharmacy manufacturing, biochemistry, foodstuff and running water.

CX-ICM-1104 industrial conductivity meter

Main features
1.Fully intelligent: It adopts high-precision AD conversion and single chip microcomputer processing technologies
2.It can be used for conductivity and temperature measurement, automatic temperature compensation, automatic range switching, self-checking, etc.
3.Multi-parameter display
4.values with red 10 x 10mm Nixie tubes. As red display is eye-catching, the displayed values can be seen from a long distance away.
5.Strong interference immunity: Its current output adopts optoelectronic isolating technology. This meter has strong interference immunity and the capacity of long-distance transmission as well as excellent electromagnetic compatibility.
6.25C Conversion: The conductivity value measured at the current temperature is converted to that at 25C; thus, this conductivity meter always displays the conductivity value at 25C. Therefore, this meter is especially suitable for testing the various water solutions in power plants.
7.Automatic range switching: The measuring ranges can automatically switch within the measuring range of the electrode.
8.Communication interface: It can be easily connected to a computer to perform monitoring and communication.
9. With strong environmental adaptability, clear display, easy operation and excellent measuring performance

Main parameters

Standard JB/T6855-93 “Industrial Conductivity Meter”
Conductivity measuring range 0.0~20µS/cm(Electrode: K=0.01),0.1~200µS/ cm (Electrode: K=0.1)
1.0~2000µS/cm(Electrode:K=1.0),10~20000µS/cm(Electrode: K=10.0)
Accuracy Conductivity±1.0%FS; temperature: ±0.5C
Automatic temperature compensation error ±0.5%FS
Intrinsic error of the instrument conductivity: ±1.0%F.S, temperature: ±0.5C(0~60C)
Intrinsic error of electronic units conductivity: ±0.5%F.S, temperature: ±0 3C(0~60C)
Range for automatic temperature compensation 0~80C, with 25C as the reference temperature
Water sample tested 0~80C, 0.6Mpa
Repeatability error ±0.2%FS±1 unit
Stability ±0.2%±l unit FS/24H
Alarm error ≤±3.0%FS
Error caused by ambient temperature ≤±0.5%FS
Error by the supply voltage ≤±0.3%FS
Isolated current output 4~20mA (load<750kΩ)
Output current error ≤±l.0%FS
Alarm relay AC220V, 3A
Communication interface RS485 or 232(optional)
Power supply AC 220V±22V, 50Hz±1Hz
Protection IP65
Overall dimension 146 (length) x 146 (width) x 108 (depth) mm
dimension of the hole 138 x 138mm
Working conditions Ambient temperature: 0~60C; relative humidity <85%
Connection tubes for inlet and outlet water Φ8, Φ10 and Φl2
Note:This meter can be equipped with the following four kinds of conductivity electrodes: K=0.01, K=0.1, K=1.0 ,or K=10.0

Last:CX-ICM-1101 industrial conducti.. Next:CX-ICM-1103 industrial conducti..

Contact Us

Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

Phone:021-57635022

E-mail:info@gnflowmeter.com

E-mail:sales@gninstruments.com

關閉
主站蜘蛛池模板: 八宿县| 宣武区| 酉阳| 岑溪市| 霸州市| 嘉禾县| 安图县| 榕江县| 凤城市| 茌平县| 林州市| 罗源县| 南丹县| 北碚区| 那曲县| 辽源市| 旺苍县| 寿光市| 沙湾县| 宜都市| 灌阳县| 门源| 天峻县| 广丰县| 宜宾市| 中山市| 海安县| 广东省| 仪陇县| 辛集市| 兴和县| 丰宁| 黄大仙区| 乌拉特前旗| 衡阳市| 怀远县| 永德县| 河东区| 石河子市| 松溪县| 枞阳县|