Location -> Products -> Level -> Level Switch
Type：CX-FLM-UQK-12 series float level controller
Illustrate： CX-FLM-UQK-12 series float level controller used to measure the level of the opening container .
Float level controller
CX-FLM-UQK-12 series float level controller used to measure the level of the opening container .
When the level is higher or lower than the given control level ,it will emit signal through signal equipment .
According to this ,it can control the level surface speedy and achieve safety production . It is widely used ,
cause it can control a large range level ,conveniently usage and installation ,simple structure ,high accuracy ,
low price.
CX-FLM-UQK-12 series float level controller’s installation way .
1,Let the horse fix on the related container wall with 4 pieces M8 screw nails , then let the instrument install on the horse
2,Use the cable to connect the contacts device to the power supply .
Change range :the allowed change range for control level :0.5-20m
Accuracy :±20mm。
Power :（1） the contact device can connect to AC or DN ,the voltage can not exceed 220V .
（2） the contact device allow current3A。
Instrument weight: 3.0kg
Last：CX-FLM-UQK-61 multi-point contr.. Next：CX-FLM-UQK-01,02,03 float level..
